@article { author = {Emamipour, Hamidreza and Niknejhad, Mohamadjavad}, title = {Simulation of a thin film growth in the presence of active and impurity particles}, journal = {Journal of Research on Many-body Systems}, volume = {3}, number = {5}, pages = {1-8}, year = {2013}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {In this paper, in the framework of ballistic deposition model we simulate a thin film growth in the presence of two kinds of particles: an impurity particle (C) and an active particle (A).We calculate the roughness exponent and growth exponent of our model and compare them with the results of Kardar-Parisi-Zhang (KPZ) universality class. We find a critical probability (pc) in a way that for values smaller than pc, our model belongs to KPZ universality class, while for values greater than pc it does not belong to KPZ universality class.}, keywords = {Thin film growth,Ballistic Deposition,Scaling exponents,Universality class}, title_fa = {شبیه‌سازی رشد لایه‌های نازک در حضور ذرات فعال و ناخالصی}, abstract_fa = {در این مقاله در چارچوب مدل انباشت بالستیک به شبیه‌سازی رشد لایه‌های نازک در حضور دو نوع ذره فعال (A) و ناخالصی(C) می‌پردازیم و نمای مقیاسی رشد  و نمای مقیاسی زبری  را به‌دست می‌آوریم و آن‌ها را با کلاس جهانی ارائه ‌شده توسط کاردار-پاریزی-ژانگ (KPZ) مقایسه می‌کنیم. نتایج به‌دست‌آمده وجود یک احتمال بحرانی  را نشان می‌دهند، به‌گونه‌ای که به‌ازای مقادیر کوچکتر از ، مدل انباشت مورد نظر ما در کلاس جهانی KPZ قرار می‌گیرد، درحالی‌که به‌ازای مقادیر بزرگتر از  مدل مطالعه شده در این مقاله از کلاس جهانی KPZ تبعیت نمی‌کند.}, keywords_fa = {رشد لایه‌های نازک,انباشت بالستیک,نماهای مقیاسی,کلاس جهانی}, url = {https://jrmbs.scu.ac.ir/article_10711.html}, eprint = {https://jrmbs.scu.ac.ir/article_10711_eb3606aecd6662455d0b66c1884260f7.pdf} } @article { author = {پرویزی, رقیه and آزاد, سعید and Jaleh, Babak and Farshchi Tabrizi, Mahdi}, title = {An AFM and SEM characterization of protective performance of epoxy reinforced with nanometer-sized TiO2}, journal = {Journal of Research on Many-body Systems}, volume = {3}, number = {5}, pages = {9-15}, year = {2013}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {By inserting nanoparticles into a polymer matrix, a considerable improvement of properties can be achieved. In this investigation, weight fractions of TiO2 varied from 1% to 10% scale to prepare TiO2/Epoxy nanocomposites. The surface roughness and adhesion force between atomic force microscope (AFM) tip and nanocomposites have been studied for all samples which soaked in H2SO4 solution for different periods of time of 2, 5 and 10 days. Scanning electron microscopy (SEM) studies of the epoxy surfaces reveal corrosion growth as a kind of corrosion evolution. Significant improvement in corrosion resistance of nanocomposite with 5 wt. % of TiO2 nanoparticles was achieved. Besides, adding small fraction of TiO2 nanoparticles enhanced the hardness, while samples remain amorphous.}, keywords = {Nanocomposites,Atomic Force Microscopy,Epoxy,TiO2,Hardness,Corrosion,SEM}, title_fa = {مطالعه خواص مقاومتی پلیمر اپکسی تقویت شده با نانو ذرات دی‌اکسیدتیتانیوم بوسیله‌ی میکروسکوپ‌های نیروی اتمی و الکترونی روبشی}, abstract_fa = {در این تحقیق نانوکامپوزیت¬های اپکسی/دی¬اکسیدتیتانیوم با درصدهای وزنی متفاوت از یک تا ده درصد نانو ذرات تهیه شدند. خواص این نانو کامپوزیت¬ها بوسیله¬ی دستگاه¬های تبدیل فوریه¬ی فروسرخ، پراش اشعه¬ی X، سختی سنجی و میکروسکوپ¬های نیروی اتمی و الکترونی روبشی بررسی شدند. وارد کردن نانوذرات به درون ماتریس پلیمری خواص پلیمر را به¬صورت چشمگیری بهبود می¬بخشد. افزودن درصد کمی نانوذرات دی¬اکسیدتیتانیوم به پلیمر، مانع از اکسید شدن اپکسی شده و مقاومت نمونه¬ها را در مفابل اسید افزایش می-دهد. همچنین حضور نانوذرات، مقاومت اپکسی را در برابر محیط خورنده به¬صورت محسوسی افزایش داده، به¬طوریکه بهبود قابل قبولی در مقاومت خوردگی نمونه حاوی پنج در صد نانوذره رویت شد.}, keywords_fa = {نانوکامپوزیت,میکروسکوپ نیروی اتمی,پلیمر,اپکسی,دی‌اکسیدتیتانیوم,سختی سطح,خوردگی,میکروسکوپ الکترونی روبشب}, url = {https://jrmbs.scu.ac.ir/article_10712.html}, eprint = {https://jrmbs.scu.ac.ir/article_10712_c0b11aece9711f27f3139c0c89ce858b.pdf} } @article { author = {جعفرپور, مجتبی and Hesabi, Samaneh}, title = {A study and comparison of entanglement dynamics for a W state in the presence of a magnetic field and DM interaction}, journal = {Journal of Research on Many-body Systems}, volume = {3}, number = {5}, pages = {17-27}, year = {2013}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {In this research we study the dynamics of a W state, instigated by the four Heisenberg Hamitonian models XX, Ising, XXZ and XXX analytically and also investigate the effect of the DM interaction and the magnetic field on the entanglement dynamics of the end qubits. It is observed that the application of a magnetic field on the whole system does not affect the entanglement; however, application of the field to single qubits does change the entanglement and sometimes may intensify the latter. Also it is revealed that the DM interaction does affect the entanglement and diminishes the latter for all the above-mentioned Hamiltonians.}, keywords = {Entanglement,W state concurrence,Magnetic field,DM interaction}, title_fa = {بررسی و مقایسه‌ی دینامیک درهم‌تنیدگی حالت ‌ W در چهار هامیلتونی مختلف، در حضور میدان مغناطیسی و اندرکنش DM}, abstract_fa = {در این پژوهش تحول زمانی یک حالت W را تحت تأثیر چهار هامیلتونی هایزنبرگی مدل XX،Ising ، XXZ و XXX به صورت تحلیلی محاسبه کرده و نقش اندرکنش DM و همچنین میدان مغناطیسی را نیز بر دینامیک درهم‌تنیدگی بین کیوبیت‌های ابتدائی و انتهائی بررسی خواهیم کرد. ملاحظه می‌شود که در هر چهار هامیلتونی، اعمال میدان مغناطیسی بر کل زنجیره بر درهم‌تنیدگی بی تأثیر است، اما اعمال میدان بر تک کیوبیت‌ها، بردرهم‌تنیدگی تأثیر می‌گذارد و می‌تواند گاهی موجب تقویت درهم‌تنیدگی شود. هم‌چنین اندرکنش DM تحول زمانی سیستم را دگرگون می‌کند و در هر چهار هامیلتونی یاد شده موجب تضعیف درهم‌تنیدگی می‌شود.}, keywords_fa = {درهم‌تنیدگی,حالت W,کانکرنس,میدان مغناطیسی,اندرکنش DM}, url = {https://jrmbs.scu.ac.ir/article_10713.html}, eprint = {https://jrmbs.scu.ac.ir/article_10713_256f003bfb220bbf91ca7fb9e2089301.pdf} } @article { author = {Ghaderi, Kamyar and Khoeini, Farhad}, title = {Theoretical study of electronic conductance in a quantum system with two chain model leads}, journal = {Journal of Research on Many-body Systems}, volume = {3}, number = {5}, pages = {29-39}, year = {2013}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {In this study, we investigate the electron transport properties of a quantum device- with square lattice structure- attached to the two metallic leads. Based on the tight-binding model and Green’s function method, we calculate the electrical conductance of the system in the strong coupling regime, numerically. Our results show that with changing the width of the system and applying a uniform magnetic field, the transport properties of the system can be controlled. Also, by introducing a disordered structure in the system (vacancy defects), one can see a semiconducting behavior. By controlling parameters such as the system size, value of input flux and disorder, semimetal - and semiconductor - metal phase transitions occur in the system. The results of this research could have many applications in designing of nanoelectronic devices.}, keywords = {square lattice,quantum transport,Green’s function,tight-binding model}, title_fa = {مطالعه نظری رسانش الکترونی در یک سامانه‌کوانتومی با الکترودهای دو زنجیری}, abstract_fa = {در این تحقیق، ویژگی¬های رسانش الکترونی یک سامانه کوانتومی متشکل از یک وسیله با شبکه مربعی متصل به دو الکترود فلزی نیم نامتناهی را مطالعه می¬نماییم. رسانش الکترونی سامانه، بر اساس مدل تنگابست با تقریب نزدیک¬ترین همسایه¬ها و در رژیم جفت‌شدگی قوی بررسی می¬شود. همچنین رهیافت تابع گرین برگشتی برای محاسبات عددی رسانش مورد استفاده قرار می¬گیرد. نتایج نشان می¬دهد که با تغییر پهنای سامانه و اعمال میدان مغناطیسی یکنواخت می¬توان ویژگی¬های الکتریکی این سامانه را کنترل نمود. همچنین معرفی ساختار نقص¬دار سبب کاهش رسانش و ایجاد شکاف انرژی می¬شود. با کنترل پارامترهایی مانند اندازه سامانه، مقدار شار مغناطیسی ورودی و بی¬نظمی به صورت تهی¬جا، گذار فاز نیم¬فلز- فلز و نیم¬رسانا- فلز در سامانه رخ می¬دهد. نتایج این تحقیق می¬تواند در طراحی ادوات نانوالکترونیک کاربردهای زیادی داشته باشد.}, keywords_fa = {شبکه مربعی,ترابرد کوانتومی,تابع گرین,مدل تنگابست}, url = {https://jrmbs.scu.ac.ir/article_10714.html}, eprint = {https://jrmbs.scu.ac.ir/article_10714_b55567e35000b821e9c0e5c0d04ea0e1.pdf} } @article { author = {Ahmadizadeh, Sana and کاظمی نژاد, ایرج}, title = {Effect of pH on the removal of copper ions from aqueous solutions using iron oxide nanoparticles and iron oxide/ hydroxyapatite nanocomposites}, journal = {Journal of Research on Many-body Systems}, volume = {3}, number = {5}, pages = {41-49}, year = {2013}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {In this study, iron oxide nanoparticles and iron oxide/hydroxyapatite nanocomposites were synthesized by co-precipitation method. The samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM). The XRD patterns of the samples confirm the hexagonal structure of hydroxyapatite and tetragonal structure of maghemite. FESEM results showed that both kinds of the prepared samples are almost spherical shape and the average particle sizes are 16±1 nm and 19±2 nm for iron oxide and iron oxide/hydroxyapatite nanocomposite, respectively. FTIR spectroscopy reveals expected bonds formation. Hysteresis curves of the nanoparticles showed that the coercivity of the nanoparticles is almost zero and the nanoparticles exhibit superparamagnetic behavior. The saturation magnetization of the iron oxide nanoparticles was obtained 14.98 emu/g, while the saturation magnetization of the iron oxide/ hydroxyapatite nanocomposites was reduced to 2.83 emu/g. Finally the produced nanoparticles were used as adsorbents for the removal of copper ions from aqueous solutions. In order to compare the ability of iron oxide nanoparticles and iron oxide/ hydroxyapatite nanocomposites to remove copper ions from the aqueous solutions, efficiency and capacity adsorbtion of copper ions by the particles at different pH were determined.}, keywords = {Nanoparticles,Hydroxyapatite,Co-precipitation,Heavy metals,Iron oxide,Copper}, title_fa = {بررسی اثر pH در حذف یون مس از محیط‌های آبی با استفاده از نانوذرات ‌آهن اکسید و نانوکامپوزیت‌های آهن اکسید‌/هیدروکسی‌آپاتیت}, abstract_fa = {در این تحقیق نانوذرات مغناطیسی آهن اکسید ‌ و نانوکامپوزیت‌های ‌آهن اکسید/ هیدروکسی‌آپاتیت به روش هم‌رسوبی ساخته شدند. نانوذرات ساخته‌شده با استفاده از دستگاه‌های الگوی پراش پرتوی ایکس ((XRD، میکروسکوپ الکترونی روبشی گسیل میدانی FESEM))، اسپکتروفوتومتری تبدیل فوریه‌ی مادون قرمز FT-IR)) و مغناطیس‌سنج نمونه‌ی ارتعاشی(VSM) مشخصه‌یابی شدند. الگوی پراش پرتوی ایکس نمونه‌ها ساختار هگزاگونال هیدروکسی‌آپاتیت و تتراگونال مگمایت را تائید کردند. نتایج حاصل از میکروسکوپ الکترونی روبشی گسیل میدانی نشان داد که در هر دو نمونه‌، نانوذرات تهیه‌شده تقریباً کروی شکل و اندازه‌ی میانگین آن‌ها برای نانوذرات ‌آهن اکسید و ‌آهن اکسید/ هیدروکسی‌آپاتیت به‌ترتیب nm2±16 وnm 2±19 است. منحنی پسماند نمونه‌ها نشان داد که در نمونه‌های تهیه‌شده، نیروی وادارندگی تقریباً صفر بوده و نانوذرات خاصیت ابرپارامغناطیس از خود نشان دادند. میزان مغناطش اشباع در نانوذرات آهن اکسید emu/g 98/14 بود، در حالی که این میزان در نانوذرات آهن اکسید‌ / هیدروکسی‌آپاتیت به emu/g83/2 کاهش یافت. در نهایت نانوذرات تهیه شده به‌عنوان جاذب برای حذف یون‌های مس از محیط‌های آبی به‌کارگرفته شدند و به‌منظور مقایسه‌ی قابلیت حذف یون‌های مس توسط نانوذرات ‌آهن اکسید و نانوکامپوزیت‌های‌ آهن اکسید/ هیدروکسی‌آپاتیت از محیط‌های آبی، بازده‌ و ظرفیت جذب یون‌های مس در pH های مختلف محلول توسط این نانوذرات تعیین گردید.}, keywords_fa = {نانوذرات,هیدروکسی‌آپاتیت,هم‌رسوبی,‌ فلزات سنگین,آهن اکسید‌,مس}, url = {https://jrmbs.scu.ac.ir/article_10715.html}, eprint = {https://jrmbs.scu.ac.ir/article_10715_f139fd6b9ca4ead9c90d6a51f91ab09d.pdf} } @article { author = {mahdavian mehrabani, somaye and تشکری, حسن and کنجوری, فرامرز}, title = {Electronic, thermodynamic and mechanical properties of CrAs}, journal = {Journal of Research on Many-body Systems}, volume = {3}, number = {5}, pages = {51-60}, year = {2013}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {In spintronics, transition-metal pnictides, such as CrAs in the metastable zinc-blende lattice structure, have attracted much interest due to their half-metallic ferromagnetism properties. In this paper, we have investigated the properties of CrAs in NiAs and zinc-blende structures by using ESPRESSO code. The calculations are based on the Density Functional Theory (DFT) and the Density Functional Perturbation Theory (DFPT) with the generalized gradient approximation (GGA).The Results show that CrAs in NiAs phase is metal and in zinc-blende phase is half-metal with direct band gap. The value of gap energy is 1.94 eV which is in good agreement with other previous calculations ( 1.88, 1.85, 1.87 and 1.8 eV). We have calculated Bulk module by fitting the lattice constants data to the Murnaghan equation of state. The elastic constants are calculated by using the slop of the phonon acoustic modes. The constants in NiAs phase are C11= 139.1 ,C66=83.4 ,C44=38.9 , C33=90.1 ,C12=61.1 , C13=85.4 and in zinc-blend phase are C11= 82.9 ,C44=24.5 , C12=60.1 and . According to our investigation, the elastic constants have not been calculated so far.}, keywords = {CrAs,Thermodynamic properties,phonon spectrum,elastic constants}, title_fa = {خواص الکترونی، ترمودینامیکی و مکانیکی انبوهه CrAs}, abstract_fa = {در صنعت اسپینترونیک به ترکیبات دوتایی عناصر واسطه مانند بلور CrAs در فاز شبه پایدار بلندروی، به علت رفتار فرومغناطیسی نیم فلزی آن ها، توجه زیاد شده است. در این مقاله خواص انبوهه CrAs در دو فاز شش گوشیNiAs و بلندروی مورد بررسی قرار گرفته است. محاسبات با استفاده از بسته محاسباتی Espresso بر مبنای نظریه ی تابعی چگالی و نظریه ی تابعی چگالی اختلالی، با تقریب شیب تعمیم یافته (GGA) انجام شده است. نتایج بررسی خواص الکترونی نشان داد که ساختار NiAs فلز و ساختار بلندروی نیم فلز با گاف مستقیم 1.94 الکترون-ولت است که با نتایج حاصل از کار سایرین (1/88 ، 1/85 ، 1/8 و 1/87 الکترون-ولت) تطابق دارد. با کمک معادله ی حالت مورناگون، مدول حجمی محاسبه شده است. در ادامه ثابت های کشسانی با توجه به شیب شاخه های آکوستیکی در راستاهای مورد نظر در نمودار پراکندگی فونونی محاسبه شده است. ثابت های کشسانی برای فاز بلندروی C11= 82.9 و 24.5=C44 و 60.1=C12 گیگا پاسکال و برای فاز شش-گوشیNiAs مقدارهای 139.1=C11 ،C66=83.4 ،C44=38.9 ، C33=90.1 وC12=61.1 و C13=85.4 گیگا پاسکال به دست آمد که با توجه به بررسی های انجام شده، تا کنون این ثابت های کشسانی محاسبه نشده است.}, keywords_fa = {CrAs,خواص ترمودینامیکی,طیف فونونی,ثابتهای کشسانی}, url = {https://jrmbs.scu.ac.ir/article_10716.html}, eprint = {https://jrmbs.scu.ac.ir/article_10716_2be094cbb4070ab1c3cb277883a28d4a.pdf} }