@article { author = {Babamoradi, Mohsen and منفرد, محمد and وساقی, محمدعلی}, title = {The study of uniaxial deformation in the diamond vacancy by Hubbard model}, journal = {Journal of Research on Many-body Systems}, volume = {5}, number = {10}, pages = {1-7}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2016.11710}, abstract = {Generalized Hubbard model was used to study the effect of uniaxial deformation of the vacancy defect in diamond. The [001] strain on the vacancy’s neighboring carbon atoms was assumed and in consequence the symmetry of crystal lowered to D2d. The results of Hubbard calculation with C70H70 cluster in the Gaussian 2003 package show that the T states (triplet spatial degenerate state) spilt to E (double spatial degenerate state) and A state (single spatial degenerate state). Also we found that the GR1 line in V0 will be changed by deformation percent of the vacancy’s neighboring carbon atoms and a little change in the ND1 line in the NV- which is in agreement with experimental results. Our results can predict the experimental results in this field.}, keywords = {Diamond vacancy,Hubbard model,uniaxial deformation}, title_fa = {بررسی تغییر شکل تک‌محوره در تهی‌جای الماس توسط مدل هابارد}, abstract_fa = {در این مقاله به کمک مدل هابارد تعمیم یافته تنش محوری در راستای [001] در شبکۀ تهی‌جای الماس مورد مطالعه قرار گرفته است. این تنش منجر به تغییر مکان اتم‌های کربن اطراف تهی جا شده و تقارن را به D2d کاهش می‌دهد. نتایج به دست آمده از این مدل و به کمک خوشۀ C70H70 در نرم‌افزار گاوسین نشان می‌دهد که ترازهای انرژی T (با تبهگنی فضایی سه-گانه) به ترازهای انرژی E (با تبهگنی فضایی دو‌گانه) و A (بدون تبهگنی فضایی) تبدیل می‌شوند. همچنین مشاهده شده است که خط جذبی GR1 در تهی‌جای خنثی (V0) در اثر جابجایی اتم‌های اطراف تهی‌جا در شبکۀ الماس تغییر قابل توجهی می‌کند و در خط جذبی ND1 در تهی‌جای منفی (V-) تغییر اندکی مشاهده می‌شود که با داده های تجربی در توافق است. با توجه به کارهای گسترده‌ای که در این زمینه انجام می‌شود نتایج به‌دست آمده می‌تواند در تفسیر داده‌های تجربی راه گشا باشد.}, keywords_fa = {تهی جای الماس,هامیلتونی هابارد تعمیم یافته,تغییر شکل تک محوری}, url = {https://jrmbs.scu.ac.ir/article_11710.html}, eprint = {https://jrmbs.scu.ac.ir/article_11710_12988a6b439eeb92125dec3b9036f7c9.pdf} } @article { author = {پرویزی, رقیه and آزاد, سعید and مظاهری, آذردخت and یوسفی, محمد حسن and صادقی, ابراهیم}, title = {Design and fabrication of humidity sensor based on the growth of micro/nano rods of ZnO on the tapered optical fiber}, journal = {Journal of Research on Many-body Systems}, volume = {5}, number = {10}, pages = {9-17}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2016.11711}, abstract = {In this paper not expensive and sensitive humidity optical sensor was fabricated based on the growth of nano and micro rods of ZnO on the optical fiber through hydrothermal method. If fiber optic sensors that work based on evanescent waves covered with nanostructures would significantly enhance the sensitivity of sensros. Nano and micro rods of ZnO was formed densly and uniformly on the optical fiber. With exserting the humidity the refractive index around the fiber will change which leads to the variation of the external light intensity. Variations of light intensity which corresponds to the humidity concentration were recorded by spectrophotometer. Response time and recover time of sensor were measured and demonstrated that the ability of sensing humidity in acceptable level (10%-100%). Also the effect of two differet light source (laser He-Ne and white LED) on the sensitivity of sensors were investigated. The structure and morphology of ZnO nano rods were studied through XRD and SEM analysis.}, keywords = {Fiber optic sensor,ZnO nano rods,Humidity sensor,Tapered optical fiber,hydrothermal}, title_fa = {طراحی و ساخت حسگر اپتیکی رطوبت بر پایه رشد میکرو/ نانومیله‌های ZnO روی تار نوری سونش داده‌شده}, abstract_fa = {در این تحقیق حسگر نوری رطوبت به‌صورت ارزان و با حساسیت بالا توسط رشد میکرو/ نانومیله‌های ZnO به روش هیدروترمال روی تار نوری ساخته شد. حسگرهای تارنوری که بر مبنای پرتوهای محو شونده طراحی شده‌اند، اگر توسط نانو ساختارها پوشیده شوند حساسیت حسگر را بسیار بهبود می بخشند. میکرو/ نانو میله‌های ZnO بطور یکنواخت و بسیار متراکم با روی تار نوری رشد داده شد. با اعمال رطوبت ضریب شکست اطرف تار نوری تغییر کرده و منجر به تغییر شدت نور خروجی می‌شود. تغییرات شدت نور که متناسب با میزان رطوبت می‌باشد توسط آشکارساز نوری ثبت گردید. زمان پاسخ و بازگشت پذیری حسگر اندازه‌گیری شده و مشاهده گردید که توانایی حس کردن رطوبت در سطح قابل قبولی وجود دارد (%10-%100). همچنین اثرات استفاده از منبع نور لیزر و منبع نور گسترده سفید در حساسیت حسگر مطالعه شده است. ساختار و ریخت نانو میله‌های ZnO توسط آنالیزهای پراش اشعه‌ی ایکس (XRD) و میکروسکوپ الکترونی روبشی (SEM) مطالعه گردید.}, keywords_fa = {حسگر تار نوری,نانو میله ZnO,حسگر رطوبت,تار نوری سونش داده شده,هیدروترمال}, url = {https://jrmbs.scu.ac.ir/article_11711.html}, eprint = {https://jrmbs.scu.ac.ir/article_11711_5c1006530932a3852fc85978666cd6d1.pdf} } @article { author = {Mirali, Azam and Hajati, Shaaker and عوض پور, ابوالقاسم}, title = {An improvement in XPS peak shape analysis for studying the morphology of gold nanowires intermixed with polymer}, journal = {Journal of Research on Many-body Systems}, volume = {5}, number = {10}, pages = {19-26}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2016.11712}, abstract = {We have improved XPS peak shape analysis for accurate characterization of metal nanostructures intermixed with a polymer matrix. We have determined the detailed in depth distribution of cylindrical Au nanowire in polymer matrix by the analysis of a single spectrum by taking into account the electron transport phenomena corresponding to both metal and polymer components. This means that we have made a very simple and nondestructive indirect 3D XPS imaging technique for accurate inline characterization of binary component surface nanostructures including metal and polymer. This is a very promising technique which is suitable for inline quality control of such surface nanostructures.}, keywords = {metal nanostructures intermixed with polymer,cylindrical gold nanowire,XPS peak shape analysis,3D XPS imaging}, title_fa = {بهینه‌سازی تحلیل شکل قلة ایکس‌پی‌اس برای مطالعة ریخت نانوسیم‌های طلای درآمیخته با پلیمر}, abstract_fa = {روشی بهینه برای تحلیل شکل قله ایکس‌پی‌اس برای شناسایی دقیق نانوساختارهای فلزی درآمیخته با یک ماتریس پلیمری ارائه می‌شود. در این‌جا، توزیع عمقی نانوسیم‌های استوانه‌ای طلای در آمیخته با پلیمر با جزییات به‌دست می‌آید، که در آن تنها از تحلیل یک طیف در گسترة وسیعی از انرژی (حداقل تا 50 الکترون‌ولت پایین‌تر از انرژی قله) و کاهش زمینة ایجاد شده در اثر برخوردهای ناکشسان الکترون‌ها با لحاظ ترابرد الکترون مربوط به هر دو مؤلفة فلزی و پلیمری استفاده شده است. این بدان معنی است که روشی بسیار ساده و غیر مخرب برای تصویربرداری سه بعدی غیر مستقیم ایکس‌پی‌اس برای شناسایی درخط نانوساختارهای سطحی دو مؤلفه‌ای شامل فلز و پلیمر ایجاد شده است که این می‌تواند روشی بسیار مناسب برای استفاده در خطوط کنترل کیفیت تولید چنین نانوساختارهای سطحی باشد.}, keywords_fa = {نانوساختار فلزی درآمیخته با پلیمر,نانوسیم استوانه‌ای طلا,تحلیل شکل قله ایکس پی اس,تصویربرداری سه بعدی ایکس پی اس}, url = {https://jrmbs.scu.ac.ir/article_11712.html}, eprint = {https://jrmbs.scu.ac.ir/article_11712_d2b93689fd8004ffe53216437b038770.pdf} } @article { author = {razeghizadeh, alireza}, title = {Study of MWDA functional theory: freezing of simple liquids}, journal = {Journal of Research on Many-body Systems}, volume = {5}, number = {10}, pages = {27-36}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2016.11713}, abstract = {In this paper fusion liquid-solid phase by numerical method using weighted density functional theory (MWDA) , hard-sphere potential model (HS) and function (PY) by calculating total free energy of liquid metals such as sodium, magnesium and aluminum has been studid.Then we calculated the amount of density of the solid and liquid coexist using free energy graph according to density of hard-sphere fluid and solids fcc, bcc and hcp wich these results good agreement with Mont Carllo simulation results and other Previous works. Finally we study stability lattices fcc, bcc and hcp, according to their energy.Finally we study stability lattices fcc, bcc and hcp, according to their energy.}, keywords = {: Modified weighted density approximation,Helmholtz free energy,hard sphere potential model,freezing}, title_fa = {بررسی انجماد برخی فلزات مایع با استفاده از نظریة تابعی چگالی وزنی اصلاح شده}, abstract_fa = {در این مقاله گذار فاز مایع–جامد بصورت عددی و با استفاده از تقریب (MWDA)، مدل پتانسیل کره‌سخت ( HS) و بستار پرکس یویک (PY )، با محاسبه‌ی انرژی آزاد کل فلزات مایع مانند سدیم، منیزیم و آلومینیم مورد مطالعه قرار گرفته شده است. سپس با رسم نمودارهای انرژی آزاد برحسب چگالی، برای مایع کره‌سخت و جامدهای fcc ،bcc وhcp مقادیر چگالی جامد و مایع همزیست را محاسبه نمودیم که این نتایج با نتایج شبیه سازی مونت کارلو و سایر کارهای پیش از این در توافق خوبی بود. در آخر پایداری شبکه‌های fcc ،bcc وhcp با توجه به انرژی‌های آنها مورد بررسی قرار گرفت.}, keywords_fa = {تقریب چگالی وزنی اصلاح شده (MWDA),انرژی آزاد هلمهولتز,مدل پتانسیل کرة ‌سخت,انجماد}, url = {https://jrmbs.scu.ac.ir/article_11713.html}, eprint = {https://jrmbs.scu.ac.ir/article_11713_82c4c53f46b9d2dbfb8639f2a5e1d494.pdf} } @article { author = {Rasuli, Reza and Mousavi, Seyede Farnaz}, title = {Porous coatings of polyvinylpyrrolidone fibers electrospun using the Faraday effect}, journal = {Journal of Research on Many-body Systems}, volume = {5}, number = {10}, pages = {37-42}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2016.11714}, abstract = {Electrospinning is a fast, simple and powerful method to synthesis fibers. In this paper, we report the results of nonconductive PVP – ethanol solution electrospinning in presence of a time-variable magnetic field. Optical microscopy results show that helical fibers would form because of Faraday Effect whereas in the absence of magnetic field fibers are spun in a random non-helical manner. Scanning electron microscopy investigations show that applying a variable magnetic field cause to the stability and uniformity of the spun fibers. In addition, results show that the fibers’ diameters are dependent on the magnetic field and frequency as well as curvature of fibers.}, keywords = {electrospinning,Magnetic field,fiber}, title_fa = {تولید پوشش متخلخل از الیاف پلی وینیل پیرولیدون به روش الکتروریسی با اثر القای فارادی}, abstract_fa = {الکتروریسی روش سریع، ساده و کارآمد در تولید الیاف به شمار می‌رود. در این مقاله، نتایج حاصل از الکتروریسی فیبرهایی از پلیمر نارسانای پلی وینیل پیرولیدون حلال اتانول در حضور میدان مغناطیسی متغیر ارائه می‌گردد. بررسی نمونه ها با میکروسکوپ نوری نشان داد اعمال میدان مغناطیسی متغیر در حین ساخت فیبر موجب پیچیده شدن آنها می شود در حالی که در غیاب میدان الیاف با ساختاری تصادفی و غیر مارپیچ شکل می‌گیرند. بررسی میکروسکوپ الکترونی روبشی نشان داد اعمال میدان مغناطیسی متغیر موجب یک شکل شدن و پایداری فیبرهای ریسیده شده می‌گردد. همچنین نتایج نشان داد که قطر این فیبرها و نیز پیچش فیبرها تابعی از شدت و فرکانس میدان مغناطیسی هستند.}, keywords_fa = {الکتروریسی,میدان مغناطیسی,الیاف}, url = {https://jrmbs.scu.ac.ir/article_11714.html}, eprint = {https://jrmbs.scu.ac.ir/article_11714_095863b82ac869cffe45c4e48da7c4df.pdf} } @article { author = {Sabaeian, Mohammad and عجم گرد, نرگس and Heydari, Mehdi}, title = {Enhancing Purcell’s factor of plasmonic bowtie nano-antennas for quantum dot emitters of InGaN/GaN in green band}, journal = {Journal of Research on Many-body Systems}, volume = {5}, number = {10}, pages = {43-52}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2016.11715}, abstract = {In this work, plasmonic bowtie nano-antennas (as two opposite nano-prisms) for enhancing the electric field and Purcell’s factor of InGaN/GaN quantum dot emitters have been designed. To this end, at first, gold, silver, copper, and aluminum bowties have been investigated. The primary results showed aluminum bowties are more suitable for low wavelength excitations near the green band. Then, the size, gap, and substrate of aluminum bowties have been examined. The results showed aluminum nano-antennas with the length of 63.6 nm, the thickness of 30 nm, top angle of 300, and gap of 20 nm, when are grown on GaN/glass as substrate, results in a Purcell;s factor of 81 with a resonance wavelength of 535 nm. Replacing the AlN/glass with GaN/glass substrate, results in a Purcell’s factor of 86.3 and resonance wavelength of 495 nm.}, keywords = {Plasmonics,nano-antenna,optical cavity,Purcell's effect}, title_fa = {ارتقاء عامل پارسل نانوآنتن‌های پاپیونی پلاسمونیکی برای گسیلنده‌های نقطۀ کوآنتومی InGaN/GaN در باند سبز}, abstract_fa = {در این مقاله، نانو‌آنتن‌های پلاسمونیکی پاپیونی (به‌صورت دو منشور مقابل هم) برای ارتقاء میدان الکتریکی و عامل پارسل گسیلنده‌های نقطۀ کوآنتومی InGaN/GaN در منطقۀ سبز طراحی شدند. برای این کار، ابتدا فلزات طلا، نقره، مس و آلومینیوم بررسی شدند. نتایج اولیه نشان دادند که نانو پاپیون‌های آلومینیومی برای برانگیختگی‌های با طول‌موج نزدیک باند سبز مناسب‌تر هستند. سپس، اثر اندازه، گاف و زیرلایۀ نانوپاپیون‌های آلومینیومی بررسی شدند. نتایج نشان دادند که نانوآنتن‌های پاپیونی آلومینیومی با طول منشورهای 6/63 نانومتر، ضخامت 30 نانومتر، زاویۀ راس 30 درجه و گاف 20 نانومتر، وقتی روی زیرلایۀ گالیوم‌نیتراید‌ـ‌شیشه رشد داده شوند، عامل پارسلی برابر با 81 در طول موج 535 نانومتر دارند. اگر به جای گالیوم‌نیتراید‌ـ‌شیشه از زیرلایۀ آلومینیوم‌نیتراید‌ـ‌شیشه استفاده شود، عامل پارسل به 3/86 و طول‌موج تشدید به 495 نانومتر می‌رسد}, keywords_fa = {پلاسمونیک,نانوآنتن,کاواک نوری,اثر پارسل}, url = {https://jrmbs.scu.ac.ir/article_11715.html}, eprint = {https://jrmbs.scu.ac.ir/article_11715_68a4f61bbc33764aab17de58225035ed.pdf} }