@article { author = {Arabi, Hadi and Khalili Moghadam, Narjes and Shirinzadeh, H}, title = {The Effect of pH Value on Structural and Magnetic Properties of Magnesium Ferrite Nanoparticles}, journal = {Journal of Research on Many-body Systems}, volume = {1}, number = {1}, pages = {9-20}, year = {2011}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {In this research, magnesium ferrite nanoparticles (MgFe2O4) were synthesized by sol-gel auto combustion method using precursors with different pH values. The structural properties of the calcinated samples were studied by X-ray diffraction (XRD). In all of the samples, the desired phase of ferrite was completely formed. The mean crystallite size, which was estimated by using the Scherer equation, had no significant change with increase of pH and was about 20nm. These variations are due to ion distribution change on the lattice sites. The accurate value and distribution of the size of nanoparticles were investigated by probing transmission electron microscopy (TEM). The results showed that the growth of nanoparticles and their distribution changed with increasing the pH value. Nanopowders at pH=7 were homogeneous and no agglomeration was observed and their size was about 30nm. The magnetic properties of nanoparticles were measured by a vibrating sample magnetometer (VSM). Increasing the pH value gave rise to reducing the MS from 26.32 to 19.61 emu/gr, and the variation of HC between 74.06 and 89.74 Oe. These changes might be due to the variation in size, distribution of ions, canting effects and shape and magneto crystalline anisotropies of nanoparticles.}, keywords = {Nanoparticles,Magnesium ferrite,Sol-gel auto combustion,pH’s effect,Magnetic properties}, title_fa = {مطالعه تأثیر مقدار pH بر روی خواص ساختاری و مغناطیسی نانوذرات فریت‌منیزیم}, abstract_fa = {در این پژوهش نانوذرات فریت‌منیزیم (MgFe2O4) به روش سل ژل خوداحتراقی با استفاده از پیش‌ماده‌هایی با مقادیر pH متفاوت تهیه شد. خواص ساختاری نمونه­های تکلیس شده با روش پراش پرتو X (XRD) مورد مطالعه قرار گرفت. در تمامی نمونه­ها فاز فریت مورد نظر کاملاً شکل گرفته است. میانگین اندازه بلورک­ها که توسط فرمول شرر محاسبه شد، با افزایش  pHتغییر چشمگیری ندارد و حدودnm  20 است. این تغییرات به علت تغییر توزیع یون‌ها در جایگاه‌های شبکه می‌باشد. اندازه دقیق و توزیع اندازه نانوذرات توسط میکروسکوپ الکترونی عبوری (TEM) مورد بررسی قرار گرفتند و نتایج نشان دادند که با افزایش pH رشد نانوذرات و توزیع آن‌ها تغییر می­کنند. در 7pH=  توزیع ذرات یکنواخت بوده و ذرات به هم چسبیده نیستند و اندازة آن‌ها حدود nm 30 است. خصوصیات مغناطیسی نانوذرات توسط مغناطیس‌سنج با نمونه نوسانی (VSM) اندازه­گیری شدند. با افزایش pH مقدار  MSاز 32/26 به emu/gr61/19 کاهش می‌یابد ومقدار HC بین دو مقدار 74/89 و Oe 06/74 تغییر می‌کند. این تغییرات ممکن است به علت تغییر اندازه، توزیع یون­ها، اثرات کج­شدگی و ناهمسانگردی شکلی و مغناطوبلوری نانوذرات باشند.  }, keywords_fa = {نانوذرات,فریت منیزیم,سل ژل خوداحتراقی,اثرpH,خواص مغناطیسی}, url = {https://jrmbs.scu.ac.ir/article_10347.html}, eprint = {https://jrmbs.scu.ac.ir/article_10347_bfd8e3c4844128976287d7871d52db82.pdf} }