@article { author = {Kazeminezhad, I and Farajianpour, F and Ramezani, Z.}, title = {Synthesis of CuFe2O4 Nanoparticles by Co-precipitation Method and their Application in Ethanol Gas Sensor}, journal = {Journal of Research on Many-body Systems}, volume = {1}, number = {1}, pages = {32-38}, year = {2011}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {}, abstract = {Inthis study, CuFe2O4 nanoparticles were synthesized byco-precipitation method using oleic acid as surfactant under different growthtemperatures. The samples were calcined at different temperatures to find theirformation phase. The particles were studiedusing XRD and SEM. XRD results showed thetetragonal structure of the samples. SEM analysis showed that the influence ofsynthesis temperature and calcinations temperature on morphology and meannanoparticles size. Copper ferrite nanoparticles and potassium bromideparticles were used as metal oxide semiconductor gas sensor for detection ofethanol gas. Different voltages were applied to the sensor and the optimum voltage ofthe sensor wasdetermined. Finally, the response of the sensor was calculated according to thevarious concentration of ethanol gasand its curve was drawn in terms of the gasconcentration}, keywords = {: Nanoparticles,Copper ferrite,Co-precipitation,Ethanol gas sensor}, title_fa = {ساخت نانوذرات مغناطیسی CuFe2O4 به‌روش هم‌رسوبی و به‌کارگیری آن‌ها در حسگر گاز اتانول}, abstract_fa = {در این تحقیق نانوذرات مغناطیسی CuFe2O4 به­روش هم­رسوبی و در حضور اسید اولئیک به­عنوان پایدارساز، در دمای­های مختلف رشد تهیه و به­منظور تشکیل فاز بلوری در دماهای مختلف کلوخه­سازی شدند. ذرات به دست آمده به­وسیله­ی آنالیز پراش پرتو ایکس و میکروسکوپ الکترونی روبشی مورد مطالعه قرار گرفتند. الگوی پراش پرتو ایکس نمونه­ها ساختار تتراگونال فریت مس را تأیید کرد. آنالیز میکروسکوپ الکترونی روبشی، اثر دمای کلوخه­سازی و هم­چنین دمای رشد را بر ریخت‌شناسی و اندازه­ی میانگین نانوذرات نشان دادند. از نانوذرات فریت مس به­همراه برمید پتاسیم در ساخت حسگر استفاده شد و حسگر حاصل برای تشخیص گاز اتانول به­کار رفت. ولتاژهای مختلف V10-1 به حسگر اعمال و بهترین ولتاژ برای عملکرد حسگر تعیین شد. در نهایت پاسخ حسگر بر اساس غلظت­های مختلف گاز اتانول محاسبه و نمودار آن بر حسب غلظت گاز رسم شد.  }, keywords_fa = {نانوذرات مغناطیسی,فریت مس,هم‌رسوبی,حسگر گاز اتانول}, url = {https://jrmbs.scu.ac.ir/article_10349.html}, eprint = {https://jrmbs.scu.ac.ir/article_10349_beb107d775a54d1c5bd40aff051ed022.pdf} }