@article { author = {Ghalambor Dezfuli, Abdolmohammad and hafizi makan, mahnaz and seidali lir, zahra}, title = {Production of SnO2/ZnO composite hollow nanofibers by electrospining and Investigation of their structural and photocatalytic properties}, journal = {Journal of Research on Many-body Systems}, volume = {10}, number = {2}, pages = {53-66}, year = {2020}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2322-231X}, eissn = {2588-4980}, doi = {10.22055/jrmbs.2020.15938}, abstract = {In this paper, synthesis of SnO2/ZnO composite hollow nanofibers using simple electrospinning method is reported. To improve the functional properties of composite hollow nanofibers, a different amount of ZnO precursor is added to the SnO2 precursor used in the solution. The structural and optical properties of produced nanofibers are studied using Scanning Electron Microscope (SEM), X-Ray (XRD) Diffraction, Ultraviolet-Visible Spectrophotometer (UV-Vis) and Fourier Transformed Infrared Spectrophotometer (FTIR). The XRD results show changes in the relative intensity of ZnO and SnO2 peaks with the increase or decrease amount of composite components. The FT-IR spectrum indicates a decrease in the relative band intensity of SnO2 with increasing ZnO in the composite. The UV-Vis spectra also show the flattening of the peaks by adding ZnO. Finally in the studying of photocatalytic properties with different ratios, the ratio of    shows the highest color decomposition, of the order of 62%, in 2 hours under UV irradiation.}, keywords = {hollow nanofibers,electrospining,SnO2/ZnO,Composite,photocatalyst}, title_fa = {ساخت نانوالیاف توخالی کامپوزیتی SnO2/ZnO به روش الکتروریسی و بررسی خواص ساختاری و فوتوکاتالیستی آنها}, abstract_fa = {در این مقاله تولید نانوالیاف توخالی SnO2/ZnO با استفاده از روش سادۀ الکتروریسی گزارش می‌شود. جهت بررسی میزان بهبود خواص کاربردی و هم‌چنین نحوه تشکیل نانوالیاف توخالی کامپوزیتی، میزان‌های متفاوتی از پیش‌مادۀ ZnO به‌صورت نسبتی از SnO2 مورد مطالعه قرار گرفتند. در این‌کار، خواص ساختاری و نوری نانوالیاف توخالی تولید شده از طریق میکروسکوپ الکترونی روبشی (SEM)، الگوی پراش اشعۀایکس (XRD)، طیف‌سنج تبدیل فوریه (FT-IR) و طیف‌سنج فرابنفش-مرئی (UV-Vis) مورد بررسی قرار می-گیرد. نتایج حاصل از XRD نشان‌دهندۀ تغییرات شدت قله‌های مربوط به ZnO و SnO2 با افزایش و یا کاهش نسبت موجود در کامپوزیت است. طیف حاصل از FT-IR نیز نشان دهندۀ کاهش شدت نسبی نوار مربوط به SnO2 با افزایش میزان نسبی ZnO در کامپوزیت است. علاوه‌ بر این طیف‌های مرئی-فرابنفش، پهن شدگی قله را با اضافه نمودن ZnO نشان می‌دهد. در نهایت در بررسی خواص فوتوکاتایستی برای نسبت‌های مختلف، نسبت ZnO/SnO2 =1/2 بیشترین تجزیۀ رنگ در 2 ساعت تحت تابش پرتو فرابنفش به میزان 62% را نشان می‌دهد.}, keywords_fa = {نانوالیاف توخالی,الکتروریسی,SnO2/ZnO,فوتوکاتالیست,کامپوزیت}, url = {https://jrmbs.scu.ac.ir/article_15938.html}, eprint = {https://jrmbs.scu.ac.ir/article_15938_50137c177ab544c752d7308816908d15.pdf} }