شبیه سازی پارامترهای هیدرودینامیکی هدف همجوشی یون سنگین

غلامزاده, لیلا; باغستانی, سمیه; شریفیان, مهدی

doi:10.22055/jrmbs.2019.14596

شبیه سازی پارامترهای هیدرودینامیکی هدف همجوشی یون سنگین

نوع مقاله : مقاله پژوهشی کامل

نویسندگان

¹ گروه هسته ای ، دانشکده فیزیک، دانشگاه یزد، یزد، ایران

² بخش اتمی و مولکولی، دانشکده فیزیک، دانشگاه یزد، یزد، ایران

10.22055/jrmbs.2019.14596

چکیده

در همجوشی یون سنگین که یکی از راههای تولید انرژی هسته‌ ای است، هدف بوسیله باریکه‌های یون سنگین بطور مستقیم متراکم ‌می‌گردد. باریکه‌های یونی به دلیل دارا بودن بازده، آهنگ تکرار و قابلیت کارایی بالا از مزایای بیشتری نسبت به لیزرها برخوردار هستند. طراحی شکل پالس و طراحی لایه های هدف از پارامترهای مهم در مقدار بهره هستند. در این مقاله، پارامترهای هیدرودینامیکی هدفی که با باریکه‌ یون بیســـــموت با انرژیGeV 10و طول پالسns 21 راه اندازی شده با روش تفاضل محدود در حوزه زمان شبیه سازی شده است. بهره‌ محاسبه شده برای یک هدف دلخواه 222 به‌دست آمده است. نتایج مقادیر شبیه سازی با نتایج کدهای DEIRA و MEDUSA مقایسه شده است.

کلیدواژه‌ها

عنوان مقاله [English]

Simulation of hydrodynamic parameters of heavy-ion fusion target

نویسندگان [English]

leila gholamzadeh ¹
somayeh Baghestani ²
mehdi Sharifian ²

¹ Nuclear Group, faculty of physics, Yazd University, Yazd, Iran

² Atomic and molecules Group, Faculty of Physics, Yazd University, Yazd, Iran

چکیده [English]

In heavy ion fusion is one of the ways of producing nuclear energy, target is directly compressed by heavy ion beams. Ion beam due to high efficiency, repetition rate and high performance capability are more advantages than lasers. The design of pulse shape and target layers are important parameters in gain value. In this paper, the target hydrodynamic parameters driven by bismuth ion beam with energy 10GeV and pulse duration 21ns, are simulated with the finite difference time domain) FDTD) method. The calculated gain is 222 for a typical fuel pellet. The gain calculated for a desired target is achieved 222. Our simulation results are compared with the results of MEDUSA and DEIRA codes.

کلیدواژه‌ها [English]

heavy ion fusion
pulse shape
gain

مراجع

[1] S. Pfalzner, An Introduction to Inertial Confinement Fusion, Taylor & Francis, CRC Press, (2006).

[2] S. Atzeni, The physics of inertial fusion, CRC Press, (2004).

[3] D.A.Callahan, M.C. Herrmann, M. Tabak. Progress in heavy ion target capsule and hohlraum design, Laser and Particle Beams 203 (2002), 405-410.

[4] G.O. Allshouse, and et al. Deposition and drive symmetry for light ion ICF targets. Nuclear Fusion 39 7 (1999) 893.

[5] J. Lindl, Development of the indirect-drive approach to inertial confinement fusion and the target physics basis for ignition and gain, Physics of Plasma2 (1995) 3933-4024.

]6[ م. اسکندری، اصول همجوشی هسته‌ای، انتشارات دانشگاه شیراز، (1374).

[6]M. Skandari, Principle of Nuclear Fusion, Shiraz university Publications, (1995)

[7] N.A.Tahir, K.A. Long, Numerical simulation and theoretical analysis of implosion, ignition and burn of heavy-ion-beam reactor-size ICF targets. Nuclear Fusion 23 (1983), 887-889.

[8] M. Basko. High gain DT targets for heavy ion beam fusion, Nuclear fusion 32 (1992, 1515-1529.

[9] M.M. Basko. DEIRA. A1-D 3-T Hydrodynamic Code for Simulating ICF Targets Driven by Fast Ion Beam, Version 4. Institute for Theoretical and Experimental Physics Moscow. (2001).

[10] T. Someya, and et al., Heavy-ion beam illumination on a direct-driven pellet in heavy-ion inertial fusion, Physical Review Special Topics7 (2004), 044701-1, 13.

[11] S. Kawata, and et al., Robust heavy-ion-beam illumination in direct-driven heavy-ion inertial fusion, Nuclear Instruments And Methods In Physics Research Sextion A 577 (2007) 327-331.

[12] S. Kawata. DT fuel concentration in an ICF pellet, AIP Conference Proceedings.369 (1996) 339-344.

[13] Y.Iizuka, and, et al. Study on target structure for direct-indirect hybrid implosion mode in heavy ion inertial fusion. Nuclear Instruments and Methods in Physics Research Section A 606 1-2 (2009) 165-168.

[14] Y.Iizuka, and, et al. Direct-Indirect Hybrid Implosion in Heavy Ion Inertial Fusion. Journal of Plasma Fusion Research 8 (2009), 1200-1203.

[15] S. Koseki, and et al. Direct drive fuel target optimization in HIF. EPJ Web of Conferences 59 (2013) 09001.

[16] S. Kawata, et al., Direct–indirect mixed implosion mode in heavy ion inertial fusion, Nuclear Instruments And Methods In Physics Research Sextion A 24 (2007) 332-336.

[17] A.I. Ogoyski, T. Someya, S. Kawata, Code OK1—Simulation of multi-beam irradiation on a spherical target in heavy ion fusion, Computer Physics Communications 157 2 (2004) 160-17.

[18]. L.Gholamzadeh and A. Ghasemizad, Non-Uniformity of Heavy-Ion Beam Irradiation on a Direct-Driven Pellet in Inertial Confinement Fusion, Plasma Science and Technology 13 44 (2011).

[19] S. Kawata, and et al., Robust heavy-ion-beam illumination in direct-driven heavy-ion inertial fusion, Nuclear Instruments And Methods In Physics Research Sextion A 577 (2007) 327-331.

[20] A.I. Ogoyski, T. Someya, S. Kawata, Code OK1 Simulation of multi-beam irradiation on a spherical target in heavy ion fusion, Computer Physics Communications, 157 (2004)160-172.

[21] F.F Chen, lntroduction to plasma physics and controlled fusion. Plenum Press new york and london (1974).

[22] J.P. Boris, and et al., LCPFCT-A flux-corrected transport algorithm for solving generalized continuity equations, DTIC Document, (1993).

[23] R.M. More, et al., A new quotidian equation of state (QEOS) for hot dense matter, Physics of Fluids, 31, (1988), 3059-3078.

[24] D.Varentsov. Energy loss dynamics of intense heavy ion beams interacting with dense matter. PhD thesis, Technische Universität, Darmstadt (2003).

[25] R.Cranfill, and R. More, IONEOS: a fast, analytic, ion equation-of-state routine,Los Alamos Scientific Laboratory, NM USA (1978).

[26] M.M. Basko, On the scaling of the energy gain of ICF targets, Nuclear Fusion 35 (1995) 87.

[27] J.P. Christiansen, D.E.T.F. Ashby, K.V. Roberts. MEDUSA a one-dimensional laser fusion code. Computer Physics Communications 7 5 (1974) 271-287.

[28] T.A. Mehlhorn, Finite material temperature model for ion energy deposition in ion-driven ICF targets. Journal of Applied Physics 52 11 (1980) 6522- 6532.

[29] J.F. Ziegler. The Stopping of Energetic Light Ions in Elemental Matter, Journal of Applied Physics 85 (1999)

[30] A.R. Bell, Rutherford Laboratory Report, RL-80-091 (1981)).

[31] H. Mazaki, Equations of State of Atoms for the Thomas-Fermi Theory, Bulletin of the Institute for Chemical Research, (1974). 52,681-689.

[32] J. Soltani-Nabipour, D. Sardari, G. Cata-Danil .Sensitivity of the Bragg peak curve to the average ionization potential of the stopping medium. Romanian Journal of Physics 54 3-4 (2009) 321-330.

[334] R. Froehlich, Heavy Ion Beam Driven Inertial Confinement Fusion Target Studies And Reactor Chamber Neutronic Analysis, Nuclear Engineering and Design 73 (1982) 201-222.