Effect of annealing temperature on the structural and optical properties bismuth ferrite (BiFeO3) nanoparticle

Document Type : Full length research Paper


Department of Physics, Faculty of Science, Shahid Chamran University of Ahvaz, Ahvaz, Iran


In this article‚ bismuth ferrite nanoparticles (BiFeO3) were prepared by sol-gel method. To determine the sintering temperature range of bismuth ferrite nanoparticles, thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were performed on its dry gel. In order to improve structural and optical properties, samples sintered at temperatures of 600‚ 650,700,750, 800 and 850 °C. Then‚ structural and optical properties of the samples have been investigated of by X-ray diffraction (XRD)‚ Fourier transform-infrared spectroscopy (FT-IR),Field emission scanning electron microscopy (FESEM)‚ Ultraviolet-visible spectroscopy analysis (UV-Vis) and Photoluminescence analysis (PL). The result of XRD and FT-IR analysis showed that samples have distorted perovskite structure. FESEM images indicated that by increasing sintering temperature‚ the size of nanoparticles increases. UV-Vis and PL analysis showed that samples are semiconductor and have an energy gap of about 2 (ev).


[1] S.E. Mousavi Ghahfarokhi, N. Heidary, M. Zargar Shoushtari, Investigating molar ratio of citric acid on the strucstural, magnetic and dielectric properties of SrNiFe16O27 nanostructures, Journal of Research on Many-body Systems 6 (2016) 35-48.
[2] W. Eerenstien, N.D. Mathur, J.F. Scott, Multiferroic and magnetoelectric materials, Journal of Natural Materials442 (2006) 759-765.
[3] F. Kubel, H. Schmid, Structure of a ferroelectric and ferroelastic mono domain crystal of the perovskite BiFeO3, Journal ofActa CrystallographyB46 (1990) 698-702.
[4] M. Rezaee, D. Sanavi Khoshnud, E. Dehghani, Investigating structural and magnetic nanoparticles of the bismuth ferrite with co-doped La and Y, Iranian Journal of Crystallography and Minneralogy 3 (2016) 567-572.
[5] C. Gustau, J.F. Scott, Physics and application of bismuth ferrite, Journal of Advanced Materials 21 (2009) 2463-2485.

[6] J.P. Velev, S.S. Jaswal, E.Y. Tsymbal, Multi-ferroic and magnetoelectric materials and interfaces, journal of PhilosophicalTransactions of the Royal Society A 369 (2011) 3069-3097.

[7] M.H. Basiri, The effect of adding an element La on the structural, electric and manetic parpred bismuth ferrite nanoparticles by a co-precipitation method, Master Thesis, Technology University of Shiraz (2012).
[8] H. Schmid, Multi-ferroic magneto electrics, Ferro1621 (1994) 317-338.
[9] S. Mohammadi, Investigating structuaral, magnetic and electric bismuth ferrite nanoparticles (BFO) doped with Gd synthesized by a co-precipitation method, Master Thesis, Technology University of Shiraz (2013).
[10] J. Wang, J.B. Neaton, H. Zheng, V. Nagarajan, S.B. Ogale, B. Liu, D. Viehland, V. Vaithyanathan, D.G. Schlom, U.V. Waghmare, N.A. Spaldin, K.M. Rabe, M. Wuttig, R. Ramesh, Epitaxial BiFeO3multiferroic thin film heterostructures, Mag. Sci. 299 (2003) 1719-1722.
[11] B.S. Soram, B.S. Ngangom, H.B. Sharma, Effect of annealing temperatures on the structural and optical properties of sol-gel processed nanocrystalling BiFeO3 thin film, Journal of Thin Films524 (2012) 57-61.
[12] M. Sakar, S. Balakumar, P. Saravanan, S.N. Jaisankar, Annealing temperature mediated physical properties of bismuth ferrite (BiFeO3) nanostructures synthesized by a novel wet chemical method, Materials Research Bulletin 48 (2013) 2878–2885.
[13] Z. Lin, W. Cai, W. Jiang, C. Fu, C. Li, Y. Song, Effects of annealing temperature on the microstructure, optical, ferroelectric and photovoltaic properties of BiFeO3 thin films prepared by sol–gel method, Ceramics International 39 (2013) 8729–8736.
[14] A, Zaregh, M. Izadi, M. Ghazi, Investigating structural, and magnetic bismuth nanoparticles (BFO) doped with Ni preparad by a mirowave, Master Thesis, Technology University of Shahroud (2016).
[15] L. Trif, G. Tolnai, I. Tolnai, E. Kalman, Preparation and Characterization of Hexagonal W-type Barium Ferrite Nanoparticles, journal of Progress in Colloid and Polymer Science135 (2008) 38-43.
[16] Z. Sharifi, S.E. Mousavi Ghahfarokhi, M. Zargar Shoushtari, Investigating the effect of annealing temperature on the structural and magnetic properties of lead spinel ferrite nanoparticles (PrFe2O4), Journal of Research on Many body Systems, First special letter (2015) 43-51.
[17] S.E. Mousavi Ghahfarokhi, F. Hamalzadeh Ahmadi, M. Zargar Shoushtari, T effect of molar ratio of citric acid on the strucstural, magnetic and dielectric Y-type strontium hexaferrite (Sr2Co2Fe12O22), Iranian Journal of Crystallography and Minneralogy 3 (2017) 895-904.
[18] R. Palai, R.S. Katiyar, H. Schmid, P. Tissot, S.J. Clark, J. Robertson, S.A. T. Redfern, G. Catalan, J.F. Scott, β phase and γ−β metal-insulator transition in multiferroic BiFeO3, PHYSICAL REVIEW B 77, 014110 (2008).
[19] R. Safi Najafabadi, Synthesis by a Chemical method a investigating structural, electric and magnetic Nanocrystals multiferroic BiFeO3 Master Thesis, Technology University of Shiraz (2016).
[20] M. Ranjbar, E. Ghazi, M. Izadifard, Investigating the effect drying temperature on the structural, dielectric, optic and magnetic properties BiFeO3 nanoparticles prepared by a sol-gel method, Iranian Journal of Crystallography and Minneralogy 3 (2018) 251-260.
[21] A. Yakubu, Z. Abbas, N.A. Ibrahim, M. Hashim, Effect of Temperature on Structural, Magnetic and Dielectric Properties of Cobalt Ferrite Nanoparticles Prepared via Co-precipitation Method, Physical Science International Journal 81 (2015) 1-8.
[22] M. Hasepoor, Investigating structural and magnetic bismuth ferrite nanoparticles BiFeO3 prepared by a co-precipitation method, Master Thesis, Shahid Bahonar University of Kerman (2015).
[23] R. Andoulsi, K. Horchani-Naifer, M. Ferid, Structural and electrical properties of calciumsubstituted lanthanum ferrite powders, journal of Powder Technology 230 (2012) 183-187.
[24] S. Ghosh, S. Dasgupta, A. Sen, H.S. Maiti, Low-Temperature Synthesis of Nanosized Bismuth Ferrite by Soft Chemical Route, Journal of the American Ceramic Society, 88 5 (2005) 1349–1352.
[25] M. Muneeswaran‚ P. Jegatheesan‚ N.V. Giridharan‚ Synthesis of nanosized BiFeO3 powders by co-precipitation‚ Journal of Exprimental Nano science (2012) 1-6.
[26] S. Farhadi, M. Zaidi, Bismuth ferrite (BiFeO3) nanopowder prepared by sucrose-assisted combustion method: A novel and reusable heterogeneous catalyst for acetylation of amines, alcohols and phenols under solvent-free conditions, Journal of Molecular Catalysis A: Chemical 299 (2009) 18–25.
[27] M. Khanlari, K. Neamati Ara, A. Hamidi Rad, Structural , optic properties of ZnS thin films prepared with two different methods of PVD and Spray  pyrolysis, Journal of Research on Many-body Systems 6 (2016) 15-21.
[28] S. Irfan, Y. Shen, S. Rizwan, H.C. Wang, S.B. Khan, C.W. Nan, Band-Gap engineering and enhanced phtotocatalytic activity of Sm and Mn doped BiFeO3 nanoparticles, Journal of the American Ceramic Society (2016) 1-9.
[29] F. Nin, T. Gao, N. Zhang, Z. Chen, Q. Huang, L. Qin, X. Sun, Y. Huang, Hydrothermal synthesis of BiFeO3 nanoparticles for visible light photocatalyyic applications, Journal of nanosience and nanotechnology 15 (2015) 9693-9698.
[30] S. Mohan, B. Subramanian, I. Bhaumik, P.K. Gupta, S.N. Jaisakar, Nanostructured Bi(1-x)Gd(x)FeO3–a multi ferroic photo catalyst on its sunlight driven photo catalystic activity, journal of RSC Advances4 (2014) 16871-16878.
Volume 9, Issue 1
فصل بهار
May 2019
Pages 179-191
  • Receive Date: 18 April 2018
  • Revise Date: 08 November 2018
  • Accept Date: 28 November 2018